Washing and cleaning equipment
Washing and cleaning equipment is used for cleaning parts, vehicles, engines, filters, service areas and working equipment. This section brings together equipment for garages, car washes, detailing businesses, transport companies and vehicle fleets.
Before choosing a specific model, consider the cleaning task, the parts or vehicles being cleaned, workload, available space and the required cleaning method. Part cleaning, vehicle washing, dust collection, DPF filter cleaning and dry ice cleaning usually require different equipment groups.
Equipment for service, fleet and vehicle cleaning work
Garages often need part washers, ultrasonic cleaning machines, vacuum cleaners and equipment for DPF filter or engine component cleaning. Car washes, transport companies and fleets may need equipment for washing vehicles, floors, machinery and working areas.
For small parts and metal components, use the ultrasonic cleaning machines or part washers sections. For vehicles, equipment and working areas, use the high pressure washing equipment section. Filter cleaning, engine cleaning, dust collection and dry ice cleaning are covered by separate product groups.
Equipment groups by cleaning task
- Ultrasonic cleaning machines - for cleaning parts, metal components, engine parts and fuel system components.
- High pressure washing equipment - for washing vehicles, machinery, equipment, floors and working areas.
- Part washers - for cleaning oily and technically contaminated parts before repair or assembly.
- DPF cleaning equipment - for diesel particulate filter cleaning and related service work.
- Professional Vacuum Cleaners and Dust Collectors - for dry and wet cleaning, dust, dirt and residue collection.
- Engine cleaning equipment - for cleaning engine bays and technical components.
- Bus and truck washing equipment - for commercial vehicles, buses and trucks.
- Self-service car wash - for self-service wash bays and car wash business setups.
- Dry ice cleaning equipment - for cleaning surfaces, parts and technical components without abrasive mechanical impact.
For related service work, see also air compressors, wheel washing equipment, fuel injector testing equipment and vehicle AC system flushing equipment.
-600x600h.jpg "Mammuth ecological 100 l parts wash")
WORKSHOP WASHER WITH HEATING THERMO ACTIVE 800
Manufacturer: Marwis. Country: Poland.
THERMO ACTIVE is a new, extended version of manual washers. It has been enriched with a liquid heating system, thanks to which it effectively washes away oils and greases. Washing is carried out in a closed cycle using the washing liquid MRS Ultra Cleaner Active heated to a temperature of 40 of C .
The elements can be washed with a brush or immersed directly in the bathtub. An additional advantage is a segmented tap , which enables precise directing of an additional fluid stream on the element to be cleaned (additional option)
THERMO ACTIVE is made entirely of stainless steel. It also includes a foot switch and a closing cover.
The device is intended for workshops in which machines, engines, gears, compressors and all other details contaminated with oils or greases are repaired. Thanks to the relatively large working surface, it is possible to wash even larger details or components.
Technical data:
Overall width: 780mm
Total depth: 780mm
Overall height: 1100mm
Work surface: 770x770mm
Bath capacity: 80L
Working height: 800mm
Net weight: 80kg
Working fluid capacity: 80L
Carrying capacity: 200kg
Temperature control: 0-50 o C
Heater power: 2.5kW
Supply voltage: 1 ~ 230V
WORKSHOP WASHER WITH HEATING THERMO ACTIVE 1200
Manufacturer: Marwis. Country: Poland.
THERMO ACTIVE is a new, extended version of manual washers. It has been enriched with a liquid heating system, thanks to which it effectively washes away oils and greases. Washing is carried out in a closed cycle using the washing liquid MRS Ultra Cleaner Active heated to a temperature of 40 C .
The elements can be washed with a brush or immersed directly in the bathtub. An additional advantage is a segmented tap , which enables precise directing of an additional fluid stream on the element to be cleaned (additional option)
THERMO ACTIVE is made entirely of stainless steel. It also includes a foot switch and a closing cover.
The device is intended for workshops in which machines, engines, gears, compressors and all other details contaminated with oils or greases are repaired. Thanks to the relatively large working surface, it is possible to wash even larger details or components.
Technical data:
Overall width: 1200mm
Total depth: 780mm
Overall height: 1110mm
Work surface: 1170x770mm
Bath area: 700x770mm
Working height: 800mm
Net weight: 100kg
Working fluid capacity: 80L
Carrying capacity: 200kg
Temperature control: 0-50 o C
Heater power: 2.5kW
Supply voltage: 1 ~ 230V
WORKSHOP WASHER WITH HEATING THERMO ACTIVE 2000
Manufacturer: Marwis. Country: Poland.
THERMO ACTIVE is a new, extended version of manual washers. It has been enriched with a liquid heating system, thanks to which it effectively washes away oils and greases. Washing is carried out in a closed cycle using the washing liquid MRS Ultra Cleaner Active heated to a temperature of 40 C .
The elements can be washed with a brush or immersed directly in the bathtub. An additional advantage is a segmented tap , which enables precise directing of an additional fluid stream on the element to be cleaned (additional option)
THERMO ACTIVE is made entirely of stainless steel. It also includes a foot switch and a closing cover.
The device is intended for workshops in which machines, engines, gears, compressors and all other details contaminated with oils or greases are repaired. Thanks to the relatively large working surface, it is possible to wash even larger details or components.
Technical data:
Total width: 2000mm
Total depth: 780mm
Total height: 1110mm
Working area: 1970x770mm
Net weight: 100 kg
Working height: 800mm
Working fluid capacity: 80L
Load capacity: 200kg
Supply voltage: 1 ph ~ 230V
Temperature control: 0-50oC
Heater power: 2.5kW
