Universal error eraser for Euro 4 / 5 / 6 trucks

Universal error eraser for Euro 4 / 5 / 6 trucks

The BalticDiag device will help to temporarily get rid of errors in the tractor's control units and dashboard, as well as reset the emergency mode timer. This will allow you to complete the trip without power limitation, or give you the opportunity to reach a service convenient for you without wasting time and fuel.

It's no secret that EURO 6 standard trucks are quite capricious and errors can appear on the dashboard at the slightest malfunction or software malfunction. Fixing bugs during the trip is problematic, and if you don't fix bugs in time, the truck can lose power and even enter emergency mode with a speed limit of 20 km/h. In emergency mode, it is difficult not only to reach the final point of the journey, but also to get to the nearest service center. Truck repair in a foreign country and cargo not delivered on time are unnecessary costs and inconveniences that can be avoided with the help of one device.

How this eraser works.

The device BalticDiag is very easy to use. All the driver has to do is turn on the ignition and insert the device into the diagnostic socket (OBD-II). The BalticDiag module will do the rest by itself. In a few seconds, it will diagnose the truck, remove errors and bring the truck out of emergency mode. After the work is done, you can easily continue your journey.

Usage:

1. Turn on the ignition
2. Insert the BalticDiag module into the diagnostic slot (OBD2)
3. Wait a few seconds until the indicator light (OK) lights up

Compatible with the following trucks:

• Volvo FH4; FM4; FMX4 Euro 6 (2013 - 2024)
• Volvo 4-series FH4; FM4 FMX Euro 5 (2013 - 2021)
• Volvo FE4; FL4 Euro 6 (2013 - 2021)
• Renault T; C; K Euro 6 (2013 - 2024)
• Renault D; Midlum Euro 6 (2013 - 2021)
• MAN TGS; TGX; TGM; TGL Euro 6 (2013 - 2021)
• MAN TGS; TGX; TGM; TGL Euro 6 (2020 - 2024)
• Mercedes-Benz MP Euro 5 all models (2013 -2021)
• Mercedes-Benz MP4 Euro 6 all models (2013 -2021)
• Mercedes-Benz MP5 Euro 6 all models (2019 -2024)
• DAF XF105; CF85; CF75 Euro 4 / 5 (EAS2 ECU 2007 - 2013)
• DAF XF106; CF85; CF75 Euro 6 (EAS3 ECU 2013 - 2017)
• DAF XF106; CF85; CF75 Euro 6 (EAS4 ECU 2017 - 2021)
• DAF XF106; Euro 6 (2022 - 2024) 
• DAF XG; XG+; XF Euro 6 (2022 - 2024)
• Scania Euro 6 all models (2013 - 2017)
• Scania Euro 6 all models (2017 – 2021)
• Scania Euro 5 all models (2007 - 2013)
• Iveco Euro 6 (2013 - 2018)
• Mercedes-Benz Sprinter (2017 - 2021)
• Ford F-Max (2017 - 2024)
• Iveco Daily (2014 - 2022)

Note: The error eraser is programmed per vehicle. For an additional fee, it is possible to change the software version of the system installed in the module and adapt it to another vehicle. (This does not apply to Ford and Iveco cars)