BMW complete programming package ABRITES

BMW complete programming package ABRITES

Country of origin: Bulgaria, warranty period – 24 months

This complete ABRITES BMW Programming Package is a comprehensive solution for professional work with BMW, MINI, and Rolls Royce vehicles, offering extensive diagnostic, module adaptation, key programming, and mileage correction capabilities. The package includes special functions BN011, BN012, BN013, and BN014, which allow for the most complex procedures such as EWS/EGS synchronization, programming and coding of all electronic control modules, key programming even when all keys are lost, and mileage calibration. This package ensures maximum functionality and reliability when working with various BMW Group vehicles, including E, F, and G series cars and motorcycles.

BN011 – Immobilizer Component Synchronization

• Requirements: Active ABRITES Maintenance Subscription (AMS I18).
• Purpose: Adapts the Transmission Control Module (EGS – Electronic Gearbox Computer) to EWS (Elektronische Wegfahrsperre – electronic immobilizer system) via OBDII connection.
• Capabilities: Allows linking the EGS to the vehicle when installing a new or used component, as well as performing key programming or replacing other modules related to the vehicle's chassis or security system. Enables Bosch MG / MD ECU adaptations in G-series vehicles using a DFlash dump file.

Key Functions:

• ZF6HP EGS adaptation for E-series vehicles.
• ZF8HP EGS adaptation for E-series vehicles (to install an 8HP gearbox in an E-series vehicle, data from the original DME / DDE (EGS) is required).
• ZF8HP EGS adaptation for F-series vehicles.
• Bosch MG / MD adaptation for G-series vehicles (based on dump).
• Supported Vehicles and ECUs: All E-series BMW vehicles, all F-series BMW vehicles, all G-series vehicles with Bosch MG / MD ECUs and DFlash dump.
• BN012 – Enhanced Coding Functionality
• Purpose: Provides broad capabilities for working with BMW vehicles.

Key Functions:

• DME / DDE ISN reading and display.
• DME / DDE Dflash / Pflash reading in boot mode (useful when all keys are lost).
• DME / DDE flashing (updating via OBD2 or ISN reading).
• DME / DDE working hours restoration.
• Flashing / programming of all electronic control modules.
• Coding of all electronic control modules.
• Vehicle Order / Central Coding (VO) configuration or Fahrzeugbestellung (FA).
• Mileage calibration (excluding instrument cluster, as it has its own memory).
• ID (VIN) change.
• FSC code generation for CCC / CIC / NBT.
• Service interval reset.

Supported Modules:

• All BMW E-series, F-series, and G-series vehicles.
• Note: BN012 is required for 6-speed gearbox adaptation in E-series vehicles if there is no working key or if the key was created using ZN002 PROTAG.

BN013 – CAS4, FEM / BDC, and Motorcycle (EWS4 / HUF) Key Programming

• Purpose: Perform key programming procedures (add spare keys or resolve all-keys-lost situations) for F-series BMW, MINI, and Rolls Royce vehicles with CAS4 (via OBDII connection) or FEM / BDC. For motorcycles with EWS4 and HUF.
• Additional Capabilities: Restore mileage between CAS4 or FEM / BDC, and adapt CAS4 and FEM / BDC modules.

Functionality:

• Key programming for F-series vehicles with CAS4 or FEM / BDC module.
• Key programming for BMW motorcycles with EWS4 / HUF.
• Factory settings restoration for CAS4 and FEM / BDC modules.
• CAS4 and FEM / BDC module adaptation.
• Mileage restoration for CAS4 and FEM / BDC.

Supported Vehicles:

• BMW F-series vehicles: 1-series (F20; F21), 2-series (F22; F23), 3-series (F30; F31; F34), 4-series (F36; F32; F33), 5-series (F10; F11), 6-series (F12; F13), 7-series (F01; F02; F03; F04), X1 (F48), X2 (F39), X3 (F25), X4 (F26), X5 (F15), X6 (F16), i3 (I01), i8 (I12; I15).
• MINI Cooper vehicles: Mini F56 – base models.
• Rolls Royce vehicles: Ghost Series I, Wraith, Dawn.
• BMW motorcycles: C650 GT, S 1000 RR, S 1000 R, S 1000 XR, R 1200 GS/Adv./RT/R/RS, K 001, K 1200 R/S, K 1300 R, K 1600 Bagger, F 750 GS, F 800 GS, F 850 GS/Adv., F 900 R/XR, R nineT/Pure/Scrambler/Racer/Urban G/S, K 24 series.
• BMW scooters: C600, C650.

BN014 – OBDII Key Programming for E-series and F-series vehicles with BDC

• Purpose: Key programming procedures for all E-series vehicles with CAS3 and CAS3+ modules and F-series vehicles with BDC modules, all work is performed via OBDII connection.

Key Functions:

• Key programming for E-series vehicles with CAS3 and CAS3+ modules via OBDII.
• Key programming for F-series vehicles with BDC modules via OBDII.
• BDC module adaptation via OBDII for all F-series vehicles.

Other Functions:

• ISN reading / correction / writing.
• Mileage configuration.

Supported Vehicles:

• All E-series vehicles with CAS3 and CAS3+ modules (BMW, MINI, and Rolls Royce).
• All F-series vehicles with BDC modules (BMW, MINI, and Rolls Royce), including BMW X1 (F48), BMW X2 (F39), BMW X5 (F15), BMW X6 (F16), MINI Clubman (F54), MINI Hatch (F55/F56), MINI Convertible (F57), MINI Countryman (F60).

Note: To perform key programming, you will need to use the ZN002 PROTAG or ZN003 PROTAG programming device. The CB015 ENET cable is highly recommended.