Oscilloscope Launch X-431 Scopebox 02-1

Oscilloscope Launch X-431 Scopebox 02-1

Manufacturer Launch (Germany). Warranty 24 months

A professional 4-channel oscilloscope that can determine the waveforms of electrical circuits. By analyzing the waveforms, it is possible to find various faults related to ignition, sensors, gears, circuits, electronic control units and engine performance; display of main and secondary charts in different views; DIS, ignition scheme; power (kW), cylinder compression, etc. analysis. Launch Sensorbox 02-1 is currently compatible with X-431 GDS / PAD / PADII / EURO TAB / EURO TAB II connected via USB.

Testing electrical signals using 5 parameters:

Amplitude (peak voltage signal)

Frequency (periodic signal cycle)

Shape (waveform)

Pulse duration (cycle or time interval signal)

Array (signal repetition characteristics)

Scopebox oscilloscope features:

Fast circuit signal capture

Select waveform display speed for quick analysis

A library of preset waveform signals in software

Logging and storage of tested signals for later analysis and troubleshooting

Automatically adjusts all chart signals on all 4 channels

Separate grounding for each channel to minimize distortion of test signals

High quality BNC connectors

Complete set of adapters for ignition systems, sensors, connectors and other accessories

Technical data:

Number of channels: 4

Bandwidth: 100 MHz

Operation time: ≤3.5 ns

Max. measurement frequency: 1 GHz (for four channels)

Input Impedance: 1MΩ±1.5%

Vertical resolution: 8 bit

DC frequency: ± 3%

Horizontal measurement: 5mV~10V

Horizontal offset range: ±2.5 V (if probe switch "x1", <500 mV/div), ±120 V (if probe switch "x1", ≥500 mV/div)

Inverter: Supported

Alignment: DC, AC

Time base range: 50ns ~ 1ks

Time base accuracy: 20 ppm

Linear decoding: CAN, LIN

Trigger Type: Edge, Pulse Width

Trigger Mode: Normal, Auto and Single SEQ

Trigger connection: DC, noise rejection

Screen: YT, Zoom, Orb

Mode: 200ms/div ~ 1000s/div

Automatic setting: supported

Automatic measuring elements: 23

Marking: horizontal marker, vertical marker

Power interface: USB, DC IN connector

Data transfer: USB

Compatible operating system: Android

Measurements: electrical circuits, sensors, drive, ignition

Working temperature: 0℃ ~ 50℃

Storage temperature: -30℃ ~ 70℃

Specifications:

Four channels for taking measurements

Maximum frequency: 150 Mhz

Bandwidth: 20 Mhz

Maximum preservation depth: 64MSa

Accuracy of measurements: +/- 1%

Resolution: 8-bit

Complete set:

Scopebox O2-1 oscilloscope

HT201 silencer: 2 pcs

Double clamps: 1 pc

Secondary ignition pickup clamps: 1 pc

HT30 BNC measuring cables: 4 pcs

Needle set: 1 pc

USB cable: 1 pc

Black multimeter probe head: 2 pcs

Red multimeter probe head: 2 pcs

Black terminals: 2 pcs

Red terminals: 2 pcs

Instructions for use: 1 pc

Carrying case: 1 pc

Package: 1 pc